LNC2 finishing cockpit interior questions

Submitted by Anonymous on

Forums: 

From: Christopher Skelt <cskelt [at] earthlink.net>
Sender: <marv [at] lancaironline.net>
Subject: LNC2 finishing cockpit interior questions
Date: Mon, 25 Aug 2014 09:03:45 -0400
To: <lml [at] lancaironline.net>
Three questions about finishing the cockpit...
  1. Can anyone recommend a fire extinguisher and location to mount it? 
  2. I’ve rolled WLS epoxy primer on the inside of the canopy frame.  I’d
    like to spray matt speckled or textured paint so the imperfections aren’t so
    obvious.  Any recommendations, preferably in spray can?
  3. I mounted a Bob Archer XPDR antenna on the fuselage side behind the hat
    rack.  The XPDR is a Garmin 327.  Can anyone confirm they’re getting
    good performance with this antenna location?  I’m close enough to Houston
    HOU and IAH and plan to fly in Class B airspace so I can’t get away with an
    intermittent signal.   I have an old stubby antenna that I could
    easily mount under the stub wing on the opposite side to the pitot head, but
    no point in moving it unless I have to (though it’s an easier job now than a
    few hours into the flight test program).
Thanks in advance...
 
Regards, Chris.
 
 

LNC2 finishing cockpit interior questions

Submitted by Anonymous on

From: Danny <danny [at] n107sd.com>
Sender: <marv [at] lancaironline.net>
Subject: RE: [LML] LNC2 finishing cockpit interior questions
Date: Tue, 26 Aug 2014 07:18:03 -0400
To: <lml [at] lancaironline.net>
Message Header


Undecoded Message

Chris,

Try Zolatone for your interior painting, http://www.aircraftspruce.com/catalog/cmpages/zolatonepaint.php?clickkey=9130.  It doesn’t come in spray cans but it’s great stuff.

 

Danny

LNC2-360 Mk-II

AOPA 04856278

EAA 647062

NRA 156453324

Nothing is foolproof to the sufficiently talented fool.

 

From: Christopher Skelt [cskelt [at] earthlink.net]">mailto:cskelt [at] earthlink.net]
Sent: Monday, August 25, 2014 9:04 AM
To: Lancair Mailing List
Subject: [LML] LNC2 finishing cockpit interior questions

 

Three questions about finishing the cockpit...

  1. Can anyone recommend a fire extinguisher and location to mount it? 

  2. I’ve rolled WLS epoxy primer on the inside of the canopy frame.  I’d like to spray matt speckled or textured paint so the imperfections aren’t so obvious.  Any recommendations, preferably in spray can?

  3. I mounted a Bob Archer XPDR antenna on the fuselage side behind the hat rack.  The XPDR is a Garmin 327.  Can anyone confirm they’re getting good performance with this antenna location?  I’m close enough to Houston HOU and IAH and plan to fly in Class B airspace so I can’t get away with an intermittent signal.   I have an old stubby antenna that I could easily mount under the stub wing on the opposite side to the pitot head, but no point in moving it unless I have to (though it’s an easier job now than a few hours into the flight test program).

Thanks in advance...

 

Regards, Chris.

 

 

LNC2 finishing cockpit interior questions

Submitted by Anonymous on

From: John Cooper <snopercod [at] comporium.net>
Sender: <marv [at] lancaironline.net>
Subject: LNC2 finishing cockpit interior questions
Date: Tue, 26 Aug 2014 07:19:21 -0400
To: <lml [at] lancaironline.net>
Message Header


Undecoded Message

Chris--



I mounted a 1.3 lb. H3R
FIRE EXTINGUISHER MODEL A344T fire extinguisher on the cockpit
floor just in front of the main spar on the passenger side. It's
easily reachable from the pilot seat.



For my cockpit interior, I used about a quart of Zolatone
"Apollo Gray". It's very durable, but I don't believe it comes in
spray cans. The Zolatone paint sorta' has chunks in it, which
splatter on the surface. You'll have to fiddle with your spray gun
to get it to spray correctly with the "chunky" paint. You can see
the "Apollo Gray" color in this photo where I was bonding my
transponder antenna on the right side of the baggage bulkhead. (I'll
let you know how it works after my first flight in a few weeks). I
would have placed the antenna where you did but my VOR antenna is on
the ceiling of the baggage area and I didn't want them to interfere.



/files/LML/70615-02-01-R/part3.09020301.02090100 [at] comporium.net" sandbox="" width="877" height="585">









Image


Transformed_Lancair transponder antenna 002.JPG

Post a Reply

More information about text formats

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Each email address will be obfuscated in a human readable fashion or, if JavaScript is enabled, replaced with a spam resistent clickable link. Email addresses will get the default web form unless specified. If replacement text (a persons name) is required a webform is also required. Separate each part with the "|" pipe symbol. Replace spaces in names with "_".
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd> <h1> <h2> <h3>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Each email address will be obfuscated in a human readable fashion or, if JavaScript is enabled, replaced with a spam resistent clickable link. Email addresses will get the default web form unless specified. If replacement text (a persons name) is required a webform is also required. Separate each part with the "|" pipe symbol. Replace spaces in names with "_".
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.
Attachments
Files must be less than 512 MB.
Allowed file types: jpg jpeg gif png txt doc docx xls xlsx pdf ppt pptx pps ppsx odt ods odp mp3 mov mp4 m4a m4v mpeg avi ogg oga ogv weba webp webm.