Content-Type: text/plain; charset=ISO-8859-1

Content-Disposition: inline

X-Mailing-List: lancair.list [at] olsusa.com



          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

          <<  Lancair Builders' Mail List  >>

          <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

>>

A complete electrical schematic is quite an

undertaking which in my case was partly done in

advance but mostly while wiring.  My wiring

book is about 3" in thickness.  Unfortunately,

it is not in a format that could be distributed.



I do however have a 1 page electrical architectural

schematic which features a three bus system

(distrubution, radio and essential).  The

schematic will be published in the Dec./Jan

issue of the Lancair Network News and would be

helpful in planning your electrical system

requirements.  The electrical system is the one

used in my 320/360 and has worked perfect so far.

It was designed for IFR flight where redundancy

in critical areas is a must.  The system is also

light weight due to some clever wiring layout methods

and takes advantage of the natural properties of

components like the battery which is a huge noise

filter.  There is no hum, alternator, strobe, or

background noise in my headsets.  





If you can't wait, I can send a few out via snail

mail.  In the interum publication AC43.13-1A

Acceptable Methods, Techniques and Practices is

a must and will take some time to digest.  It is

available from Jeppesen at (800) 443-9250 for $17.95.

Lots of good stuff in this publication in addition

to electrics.



Jim Frantz

Jim [at] Lancair.net